We did it, you can now manage multiple netool’s cloud data from https://netool.cloud. This service is in beta, we will be adding features as time goes on from our ever growing road map. The current state of netool.cloud is pretty basic but very useful. So lets check it out. Compatibility Requirements netool.io Standard build 72 […]
NE1/NE1B Firmware build 75 and App 2.0.9 Update
Netool NE1/NE1B Firmware Build 75 and App 2.0.9 Update. Release date: 03/25/19 Note: Some functions require both App 2.0.9 and firmware build 75. Requires both App and firmware to be updated. Another note: All of the connectivity issues with WiFi on iOS 13.3.x have been resolved with iOS 13.4. Change Log: Added HTTP/HTTPS check. Added […]
PoE Charger 802.3af
Did you know that you can use a PoE power adapter to charge your Netool NE1 while using it? Here is the one I use and recommend that can be found on Amazon: Model: WT-AF-5v10w microUSB Right Angle https://www.amazon.com/dp/B019BLMWWW/ref=cm_sw_em_r_mt_dp_U_SBSDDbMZWJWZS Nathan
How to add a note to a history entry.
Minimum requirements: App 2.0.3+ Firmware build 72+ 1. Navigate to the history menu. 2. Find the history entry that you would like to add a note to. 3. Tap on the pencil icon next to the notes section to add a note or edit a note. 4. A edit notes dialog box will appear, enter […]
How to use two netool’s to identify lines
Minimum requirements: App 2.0+ Firmware build 70+ *Make sure you have “DP Readonly mode” disabled in the settings(sprocket), toggle settings menu.
How to flash a port for Identification
Minimum requirements: App 2.0+ Firmware build 70+ To enable flash port mode, on the main discovery screen tap on the flash port icon shown in the screenshot above. After tapping on the flash port icon a popup will appear asking if you want to turn on port flash mode. Tap “Turn On” to enable port […]
How to detect available auto Negotiation Speed via LLDP
Minimum requirements: App 2.0+ Firmware build 70+ First, Make sure your netool is in discovery mode. Then use your netool like you normally do and if the netool detects information in the Auto Notification TLV it will be displayed on the main screen.
How to apply a filter sniff to PCAP
Minimum requirements: App 2.0+ Firmware build 70+
How to enable read only mode for discovery packet detection
Minimum requirements: App 2.0+ Firmware build 70+ Navigate to settings (sprocket icon located on the main menu), then toggle settings.
How to turn on Dark Mode
Minimum requirements: App 2.0+ Firmware build 70+